Swages out burrs in .22 chambers caused by excessive dry firing. Insert and turn, or tap against burr until chamber is smooth and round again. Can be pushed in and turned with its own handle, a MAGNA-TIP or a small wrench; or, threaded into an 8-32 cleaning...
Steel, precision adjustable spanner wrench fits the slotted forend nut on most pump shotguns for fast, easy removal. Hardened steel teeth match the notch width in the forend nut for a tight hold that won't slip and scratch the stock. Spanners are spring-loaded...
Makes sliding the assembled triggerguard into the receiver a two-handed job instead of three. Professional quality tool retains and separates the right and left cartridge stops during reassembly. Allows the hammer pin flats to line up into their slots...
Unique, extended-sleeve design lets you jewel right up to and around projections such as locking lugs and bolt handles. Supports full length of the rod; tip will not flare out. Sizes for 1/4" or 3/16" rods. Three, 2" long, Centerless Ground Rods supplied....
Make quick work of a tough job. Use an impact driver and 1/2" socket to remove the toughest firing pin bushings without damage. 2-Pin Tool is adjustable to fit most 2 pin bushings. 3-Pin Tool fits Browning Citori, B-SS, B-99 and the B-78 rifle. Easily...
The strongest barrel nut wrench available, this heavy duty professional tool is a must for every shop. An integral web be- tween the "jaws" of the wrench makes it substantially stronger than any other design. Mfg: Tom Menck SPECS: 6" (15.2cm) x 1" (2.5cm)...
With over 8 million Remington 58, 870, 878, 1100 and Savage/Stevens pump shotguns around, this is a "must have" bench tool. Fits in and around recesses to renew the staking dimples when installing shell latches on the 58, 870, 878 feed latches and interceptor...
One end for Remington 600-700 series bolt actions including XP-100 and 40; the other for Ruger. Handscrew compresses spring until cross pin can be driven out. Mfg: Tom Menck SPECS: Body is 5-15/16" (15.1cm) long. 5/8" (15.9mm) diameter. 7 1/2" oz. (21.3g)....
Safely removes even stubborn spring retainers. Threads into popular pump and semi-auto shotgun magazine spring retainers - puts an end to "flying" springs and bent retainers. Mfg: Tom Menck SPECS: Approximately 3" (7.62cm) long, blued, case-hardened steel....