Ensures reliable chambering of true, MATCH ammo in semi-auto guns. Mfg: Clymer SPECS: M-7 tool steel. Finish reamer only. 1/4" dia. round shank.
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller...
High-quality finish reamer and precision made headspace gauges make easy work when chambering a new barrel. Precision machined from high-quality steel for a lifetime of service when properly cared for. Finish reamers can be used in your lathe or hand-turned;...
For military M-852 match ammo (168 gr. bullets, M14 length); or any load using Sierra 168 gr. boattail. Mfg: Clymer SPECS: High speed steel, finish reamer only.
Back-boring reamers are invaluable for all shops that do shotgun work, especially choke and barrel modifications. Reamers available in .005" increments from .725" to .740" in 12 ga. Lead angle of reamer matches the angle of most chokes to blend into an...
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Mfg: Clymer
The fastest, slickest way to polish barrels and magazine tubes with no ripples or flat spots. Cheaper than a lathe, with less setup/cleanup time. Just secure the barrel between the non-marring, Delrin centers, turn on the buffer, and touch the barrel...
Precision ground bushings center the Gilchrist reamer in the bore. Oversize, .750" diameter, blank bushings can be turned down to fit 12 gauge bores with odd diameters. Mfg: Clymer
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched...
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched...